To Next PageTo Next Page
Why can't the other party hear my voice on my Panasonic KX-UT133 IP Phone?
This could be because the unit is muted. To resolve this, press [MUTE/ ] to turn off the mute feature. Also, if you are using the speakerphone, ensure that objects are not obstructing the microphone. Keep hands and objects away from the unit during calls.
What to do if my Panasonic KX-UT133 display is blank?
If the display is blank, it means the unit is not receiving power. Make sure the device supplying PoE is receiving power and the Ethernet cable is properly connected. If using an AC adapter, check that it is connected and also receiving power.
What to do if my Panasonic KX-UT133 IP Phone does not ring when a call is received?
If the unit doesn't ring, the ringer may be turned off. Press [ ] while a call is being received, or change the ringer volume setting.
How to reset the administrator password on a Panasonic IP Phone?
To reset the login password for the Administrator or User account on your Panasonic IP Phone's Web user interface, reset the password directly from the unit. Note that this will reset the passwords for both Administrator and User accounts. For security, it's recommended to set new passwords immediately afterward.
How to correct the time on my Panasonic IP Phone?
To correct the time on your Panasonic IP Phone, access the Web user interface to set NTP synchronization and DST (Summer Time) control. This allows the phone to adjust the time automatically. Also, check the firewall and port forwarding settings on the router.
What to do if I lost the login password of the Web user interface for the Administrator or User account on my Panasonic KX-UT133?
If you have lost the login password for the Administrator or User account on your Panasonic IP Phone's Web user interface, reset the password from the unit. For security reasons, it is recommended that the passwords are set again immediately.
Why is the time not correct on my Panasonic IP Phone?
If the time is incorrect on your Panasonic IP Phone, you can set NTP synchronization and DST (Summer Time) control in the Web user interface to adjust the time automatically. If the time is still incorrect after setting NTP synchronization, check the firewall and port forwarding settings on the router.
What to do if Panasonic Telephone unit is not performing properly?
If your Panasonic Telephone unit isn't working as expected, there are a few things you can check. First, make sure all cables and cords are properly connected. If connections are correct, verify your connection settings with your administrator. Finally, if an error occurred, try restarting the unit.
Why is displayed on the screen of my Panasonic Telephone?
If is displayed on the screen of your Panasonic Telephone, registration to the SIP server has been lost. Consult your administrator or dealer.
What to do if I cannot cancel the display lock on Panasonic Telephone?
If you cannot cancel the display lock on your Panasonic Telephone, it may be due to an incorrect PIN. Consult your administrator or dealer.
General| Resolution | 320 x 240 pixels |
|---|---|
| Power over Ethernet | Yes |
| Speakerphone | Yes |
| Dimensions | 200 x 160 x 60 mm |
| Weight | 900 g |
| Ethernet Ports | 2 |
| Protocols | SIP |
| Headset Support | Yes |
| Audio Codec | G.711, G.726, G.729 |
| Network Interface | 10/100 Mbps Ethernet |
| Headset Port | Yes |
Provides essential safety precautions to reduce risks of injury, shock, fire, and malfunction.
Safety precautions related to electrical connections and AC adaptor usage.
General safety precautions for using the unit near water, during storms, and for gas leak reporting.
Diagrams and labels for controls on the front view of KX-UT248NE and KX-UT248RU models, including LCD details.
Explains the function and status indications of the soft buttons and Message/Ringer Lamp.
Guides on adjusting ringer, handset, headset, and speaker volume using the Navigator key.
Details various methods to go off-hook and on-hook using handset, speakerphone, or headset.
Explains how to enable and cancel hands-free mode for conversations.
Explains the basic methods for initiating calls from the unit.
Explains the basic methods for receiving incoming calls on the unit.
Explains how to put a call on hold and retrieve it.
Explains how to switch between two parties during a conversation.
Explains how to mute and unmute the microphone during a conversation.
Details how to add an additional party to establish a conference call.
Explains how to check new voice messages and access the mailbox.
Explains how to forward incoming calls or reject them using Do Not Disturb.
Explains customisable flexible buttons: DN, One-Touch, Headset, BLF, ACD, Wrap Up.
Details how to handle an incoming call while already on a call.
Details how to transfer calls to another destination.
Instructions on modifying existing phonebook contact details.
Lists all configurable settings with their corresponding page numbers.
Details specific settings like Ringer, ECO Mode, and LCD Contrast.
Settings for Call Forwarding and Do Not Disturb features.
Settings to forward all incoming calls to a specified destination.
Explains the Web-based interface for configuring unit settings and features.
Steps to add new contacts to the phonebook, including name and number.
Steps to navigate and access the unit's setting menus.
Configuration options for Ringer Volume and Ringtone selection.
Enabling the DND feature to reject all incoming calls.
Settings to forward calls when the line is busy.
Configuration of basic network settings like DHCP and static IP addressing.
Explains how to enable ECO mode to reduce electricity consumption.
Instructions for mounting the unit on a wall, including safety warnings.
Explains the initial settings configuration process upon starting the unit.
Presents detailed specifications for the KX-UT248 model.
Lists common issues, their possible causes, and solutions.
Troubleshooting for call making, long distance calls, ringing, and disconnections.
Troubleshooting for audio issues related to microphone obstruction or environment.
Lists common error messages, their causes, and solutions.
General troubleshooting for display, unit performance, and connection problems.
Troubleshooting for issues where the other party cannot hear the voice.
