To Next PageTo Next Page
What to do if my Panasonic IP Phone unit is not performing properly?
If the unit is not performing properly, check that all cables or cords are properly connected. Also, your connection settings may be incorrect; consult your administrator to confirm that your settings are correct. If the problem persists, consult your dealer. Finally, if an error has occurred, try restarting the unit.
Why does sound cut out and I can hear myself through the speaker on my Panasonic KX-UT133?
This issue can occur for several reasons: * You are too far away from the microphone, so try speaking closer to it. * The environment is not suited to speakerphone calls. Do not use the unit near noise emitting devices. If in a room with windows, close the curtains or blinds. * The unit was moved during a call, so do not move the unit while on a call. * Objects are obstructing the microphone, so keep hands and objects away from the unit during calls. * The other party is using a half-duplex speakerphone. For best performance, the other party should use a full-duplex speakerphone.
Why is the Message/Ringer lamp lit on my Panasonic KX-UT133?
The Message/Ringer lamp lights up when you receive a voice message while you were on the phone or away from your desk. Check the voice message.
What to do if I cannot make long distance calls on my Panasonic IP Phone?
If you cannot make long distance calls, make sure that you have subscribed to your telephone company’s long distance service, as your telephone service may not allow you to make long distance calls.
What to do if the line is disconnected while talking to an outside party on my Panasonic KX-UT133 IP Phone?
If the line is disconnected while talking to someone, your phone system/service may impose a time limit on outside calls. Consult your dealer to extend the time limit, if necessary.
What does the 'Check LAN cable' message mean on my Panasonic IP Phone and how to fix it?
The 'Check LAN cable' message means the LAN cable is not connected. Check all connections.
What to do if I cannot hear a dial tone on my Panasonic KX-UT133?
If you cannot hear a dial tone, confirm that the LAN cable is properly connected.
What does 'Memory Full' mean on my Panasonic IP Phone and how to fix it?
The 'Memory Full' message indicates that a new entry for the phonebook or call block list cannot be stored because the phonebook or call block list is full. Delete unneeded entries.
What does 'No Entries' mean on my Panasonic KX-UT133 IP Phone and how to resolve it?
The 'No Entries' message means that the phonebook or call block list contains no entries. Store entries in the phonebook or call block list.
What does 'Please wait…' mean on my Panasonic KX-UT133 IP Phone?
The 'Please wait…' message indicates that the unit is still starting up. If you have a lot of entries in the phonebook list, the unit may take a while to start up. This is normal.
General| Resolution | 320 x 240 pixels |
|---|---|
| Power over Ethernet | Yes |
| Speakerphone | Yes |
| Dimensions | 200 x 160 x 60 mm |
| Weight | 900 g |
| Ethernet Ports | 2 |
| Protocols | SIP |
| Headset Support | Yes |
| Audio Codec | G.711, G.726, G.729 |
| Network Interface | 10/100 Mbps Ethernet |
| Headset Port | Yes |
Provides essential safety precautions to reduce risks of injury, shock, fire, and malfunction.
Safety precautions related to electrical connections and AC adaptor usage.
General safety precautions for using the unit near water, during storms, and for gas leak reporting.
Diagrams and labels for controls on the front view of KX-UT248NE and KX-UT248RU models, including LCD details.
Explains the function and status indications of the soft buttons and Message/Ringer Lamp.
Guides on adjusting ringer, handset, headset, and speaker volume using the Navigator key.
Details various methods to go off-hook and on-hook using handset, speakerphone, or headset.
Explains how to enable and cancel hands-free mode for conversations.
Explains the basic methods for initiating calls from the unit.
Explains the basic methods for receiving incoming calls on the unit.
Explains how to put a call on hold and retrieve it.
Explains how to switch between two parties during a conversation.
Explains how to mute and unmute the microphone during a conversation.
Details how to add an additional party to establish a conference call.
Explains how to check new voice messages and access the mailbox.
Explains how to forward incoming calls or reject them using Do Not Disturb.
Explains customisable flexible buttons: DN, One-Touch, Headset, BLF, ACD, Wrap Up.
Details how to handle an incoming call while already on a call.
Details how to transfer calls to another destination.
Instructions on modifying existing phonebook contact details.
Lists all configurable settings with their corresponding page numbers.
Details specific settings like Ringer, ECO Mode, and LCD Contrast.
Settings for Call Forwarding and Do Not Disturb features.
Settings to forward all incoming calls to a specified destination.
Explains the Web-based interface for configuring unit settings and features.
Steps to add new contacts to the phonebook, including name and number.
Steps to navigate and access the unit's setting menus.
Configuration options for Ringer Volume and Ringtone selection.
Enabling the DND feature to reject all incoming calls.
Settings to forward calls when the line is busy.
Configuration of basic network settings like DHCP and static IP addressing.
Explains how to enable ECO mode to reduce electricity consumption.
Instructions for mounting the unit on a wall, including safety warnings.
Explains the initial settings configuration process upon starting the unit.
Presents detailed specifications for the KX-UT248 model.
Lists common issues, their possible causes, and solutions.
Troubleshooting for call making, long distance calls, ringing, and disconnections.
Troubleshooting for audio issues related to microphone obstruction or environment.
Lists common error messages, their causes, and solutions.
General troubleshooting for display, unit performance, and connection problems.
Troubleshooting for issues where the other party cannot hear the voice.
