Panasonic KX-UTG200

4. Drive the 2 screws into the wall either 83 mm (3
1
/4 in) or 100 mm (3
15
/16 in) apart, and mount the unit on
the wall.
83 mm
(3
1
/
4
in)
100 mm
(3
15
/
16
in)
Washer
Drive the screw
to this point.
Note
• You can find a wall mounting template at the end of this manual.
• For information about locking the handset, see "Hooking the Handset (Page 68)".
Document Version 2014-11 Operating Instructions 67
Installation and Setup