Panasonic LS-400 Series - Page 55

Turn the
Jog switch.
1-level
teaching
Press the
Jog switch.
The digital display will quickly
blink to confirm the setting.
2-level
teaching
2-level
teaching
3-level
teaching
3-level
teaching
1-level
teaching
digit %
Press the
Jog switch.
Select teaching method
by turning the Jog switch.
Press the
Jog switch.
Press the
MODE key once.
Press the
MODE key once.
Select the display units
by turning the Jog switch.
8If the [Jog switch] is turned, the teaching method (red) will
blink.
0Turn the [Jog switch] to select the display units.
(1-level teaching only)
BTurn the [Jog switch] to set the shift amount.
(1-level teaching only)
CIf the [Jog switch] is pressed, the shift amount setting value
(red) will quickly blink, confirming the setting.
DIf the [MODE key] is pressed once, the amplifier will return to
‘PRO6 mode’.
EPress the [MODE key] once, the amplifier will return to ‘RUN
mode’ (normal sensing operation).
9If the [Jog switch] is pressed, the teaching method will be
confirmed.
For 1-level teaching, continue by selecting the shift amount.
AIf the [Jog switch] is pressed, the display units will be
confirmed.
(1-level teaching only)
54
Ramco National
(800) 280-6933
www.panasonicsensors.com