ON
TT
OFF
ON
TT
OFF
TT
TT
ON
OFF
ON
OFF
ON or OFFOFF
OFF
OFF or ONON
ON
4-5. Output Operation Setting Mode
This mode allows the selection of output operation
from either L-ON (Light-ON), or D-ON (Dark-ON).
* Select the output 1 or output 2 beforehand.
ONOFF
OFFON
Threshold
value
Incident light
intensity
Incident light
intensity
Incident light
intensity
Time Time
Output
operation
Output
operation
Output operation
L-ON
D-ON
L-ON
D-ON
L-ON
(Detection-ON)
D-ON
(Detection-OFF)
Output
operation
L-ON
(Detection-ON)
D-ON
(Detection-OFF)
Normal mode
Output
operation
Hysteresis mode
When setting rising
differential mode
When setting trailing
differential mode
ONOFF OFF
OFFON ON
Threshold
value 1
(1_SL)
Threshold
value 2
(2_SL)
Incident
light
intensity
Output
operation
L-ON
D-ON
Window comparator mode
ON level or
OFF level
(2_SL)
OFF level or
ON level
(1_SL)
0 9,999
Press the
MODE key
twice.
Turn the
Jog switch.
Press the
Jog switch.
The digital display will quickly
blink to confirm the setting.
Press the
MODE key
4 times.
The current
setting
9,999
Incident
light
intensity
9,999
1Press the [MODE key] twice to select the ‘output operation
setting mode’.
2The current setting for output operation will be displayed.
* The factory setting is ‘L-ON (Light-ON)’.
5Press the [MODE key] 4 times, the amplifier will return to
‘RUN mode’ (normal sensing operation).
3If the [Jog switch] is turned, the setting for output operation
(‘
’ side
…
‘’ side
…
) will blink on the digital
display.
()
4If the [Jog switch] is pressed, output operation will quickly
blink on the digital display and the selected ‘output operation’
will be confirmed.
The digital display will not blink if the setting has not been
changed.
To Next Page
Loading...
