Panasonic LS-400 Series - Others; Key Lock Function

The ‘key lock function’ prevents operators from changing the sensor settings by mistake.
Keep the Jog switch and
the MODE key pressed
for 3 sec. or more at the
same time.
Keep the Jog switch and
the MODE key pressed
for 3 sec. or more at the
same time.
Others
11-1. Key Lock Function
11
Lock engaged
Lock disengaged
1 Keep the [MODE key] and the [Jog switch] pressed for 3 sec.
or more at the same time in ‘RUN mode’ condition.
5‘ ’ will be displayed, and the key lock function will
be set to OFF.
4To disengage the lock function, keep the [MODE key] and
the [Jog switch] pressed for 3 sec. or more at the same time
once again.
3Key operations will be locked.
2‘ ’ will be displayed, and the key lock function will be
set to ON.
56
Ramco National
(800) 280-6933
www.panasonicsensors.com