223
9. Using Menu Functions
[MF Guide]
When you set the focus
manually, an MF guide that
allows you to check the
direction to achieve focus is
displayed.
A Indicator for ¶ (infinity)
s
[Peaking]
In-focus portions (portions on the screen with clear
outlines) are highlighted when focus is being adjusted
manually.
• When [Detect Level] in [SET] is set to [HIGH], portions to
be highlighted are reduced, allowing you to achieve a
more precise focus.
• Changing the [Detect Level] setting also changes the
[Display Color] setting as follows.
s
[Detect Level]
[HIGH] [LOW]
[Display Color]
[ ] (Light blue) [ ] (Blue)
[ ] (Yellow) [ ] (Orange)
[]
(Yellow-green) [ ] (Green)
[] (Pink) [ ] (Red)
[] (White) [ ] (Grey)
• Each time [ ] in [ ] is touched, the setting is switched
in order of [ON] (
[Detect Level]: [LOW]) > [ON]
(
[Detect Level]: [HIGH]) > [OFF].
• [Peaking] does not work with [Rough Monochrome] in
Creative Control Mode.
> [Custom]
MENU
To Next Page
Loading...
