255
10. Using the Wi-Fi/NFC Function
∫ This unit is compatible with NFC
Using the NFC “Near Field Communication” function, you
can easily transfer data necessary for a Wi-Fi connection
between this camera and the smartphone/tablet.
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
[Wi-Fi]/[Fn1] button can be used in two ways, as [Wi-Fi] or as
[Fn1] (function 1). At the time of purchase, it is initially set to
[Wi-Fi].
•
Refer to P317 for details about the function button.
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet to
this unit (QR code, SSID and password) is displayed. (P259)
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
• These operating instructions describe the procedure for [New Connection].
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer
to the operating instructions of your device.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[New Connection]
[Select a destination from
History] (P297)
[Select a destination from
Favorite] (P297)
ヸㄊノョㄊ
ョㄏヒ
ヸㄊノョㄊ
To Next Page
Loading...
Need help?
General
