18 VQT2R24 VQT2R24 19
Setting the clock (Continued) Setting the clock
( The clock is not set when the
camera is shipped.)
When [PLEASE SET THE HOME AREA] is displayed, press
[MENU/SET]
Set your home area
City or area
name Current time
Difference from GMT
(Greenwich Mean Time)
The current time and home area are set.
• [GPS SETTING] turns [[ON]]. (→85)
■
About automatic time correction
(→88)
To change time setting
When resetting date and time, select [CLOCK SET] from [SETUP] menu.
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in camera for the 24 hours beforehand.
• Using the GPS function, you can make settings to automatically correct the current
time. (→88)
Select [CLOCK SET] from [REC] menu or [SETUP] menu (→22)
Set the date and time (start from Step on previous page)
■
To set local time at travel destination
[WORLD TIME] (→90)
●
The GPS function is not usable unless the clock is set.
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures in digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Turn on the power
The power is turned on.
If the language select screen is not
displayed, proceed to step .
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
playback mode.)
Press [MENU/SET]
Setting time, date and display format
Use ▲▼ to set year and press ►
Use ▲▼ to set month and press ►
Do the same to set day, hour and minute
and press ►
Use ▲▼ to select display order and press ►
Use ▲▼ to select time display format and
press [MENU/SET]
• To cancel → Press .
•
Setting example of display order and time display format
∗
[M/D/Y] [24HRS]: 12:34 APR.15.2010
[D/M/Y] [AM/PM]: PM 12:34 15.APR.2010
[Y/M/D] [24HRS]: 2010.4.15 12:34
∗
When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Confirm the setting and press
[MENU/SET]
•
To return to the previous screen, press
Turn on power again and check time
display.
(Time and date can be displayed by
pressing [DISPLAY] several times.)
Set REC/PLAY switch to
before turning on power.
REC/PLAY switch
Select [CLOCK SET] from
[SETUP] menu (→22), perform
and .
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in camera for the 24
hours beforehand.
■
To set local time at travel
destination
[WORLD TIME] (→90)
●
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures in digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
For the operating procedures for the DMC-TZ10 (→17)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
