26 VQT2R24 VQT2R24 27
For details about the setting procedure in the [SETUP] menu (→20)
Using [SETUP] menu (Continued)
[RESET]
Reset to the default
settings.
[RESET REC. SETTINGS?]
[YES]/[NO]
[RESET SETUP PARAMETERS?]
[YES]/[NO]
• Information registered in [FACE RECOG.] is reset if
recording settings are reset.
•
Resetting the setup parameters will also reset the
following.
Birthdays and names in [BABY] and [PET] scene modes,
[TRAVEL DATE], [WORLD TIME], [ZOOM RESUME],
[FAVORITE] in [PLAYBACK] menu (set to [OFF]),
[ROTATE DISP.] (set to [ON]).
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[USB MODE]
Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
[SELECT ON CONNECTION]:
Select [PC] or [PictBridge (PTP)] each time you connect to
a computer or PictBridge-compatible printer.
[PictBridge (PTP)]: Select when connecting to a
PictBridge-compatible printer.
[PC]: Select when connecting to a computer.
[VIDEO OUT]
Change the video output
format when connected
to a TV, etc. (Playback
mode only).
[NTSC]/[PAL]
If the default setting is changed, AVCHD Lite motion
pictures may not be played correctly.
• Operates when AV cable is connected.
[TV ASPECT]
Change the aspect ratio
when connected to a
TV, etc. (Playback mode
only).
/
• Operates when AV cable is connected.
Item Settings, notes
The [HDMI MODE] menu item is not available in the DMC-TZ8.
For details about the setting procedure in the [SETUP] menu (→20)
[HDMI MODE]
Set the output resolution
when connected to a
high-definition TV with
an HDMI mini cable
(optional). (→146)
[AUTO]: The output resolution is automatically determined
based on information from the connected TV.
[1080i]: Outputs 1080 effective scanning lines in interlaced
format.
[720p]: Outputs 720 effective scanning lines in
progressive format.
[576p]
∗
1
/[480p]
∗
2
: Outputs 576 (or 480) effective scanning
lines in progressive format.
Interlaced and Progressive Formats
In ‘i’ = interlaced format (interlaced scanning), half of
the effective scanning lines are displayed alternately
every 1/50
∗
1
(1/60
∗
2
) second. In ‘p’ = progressive format
(progressive scanning), high-density video signals are sent
simultaneously for all effective scanning lines every 1/50
∗
1
(1/60
∗
2
) second.
The HDMI socket of this camera supports [1080i] high
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
∗
1
When the video out is
set to [PAL]
∗
2
When the video out is
set to [NTSC]
• Even if [1080i] is set, the motion picture is output at 720p
during playback.
• If no video appears on the TV even though [AUTO] is
set, try switching to [1080i], [720p], or [576p]
∗
1
([480p]
∗
2
)
to adjust to a video format that can be displayed on your
TV. (See the manual for your TV.)
• This is activated when an HDMI mini cable (optional) is
connected.
• For further details (→146)
[VIERA Link]
Enable automatic linking
with other VIERA Link-
compatible devices, and
operability with a VIERA
remote control when
connecting via an HDMI
mini cable (optional)
(→147).
[OFF]: Operations must be performed via the camera’s
own buttons.
[ON]: Operations may be performed via the remote
control of the VIERA Link-compatible device.
(Not all operations will be available.) Operability of
the camera’s own buttons will be limited.
• Works when connected via an HDMI mini cable
(optional).
Item Settings, notes
The [HDMI MODE], [VIERA Link] menu items are not available in the DMC-TZ8.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
