Panasonic Lumix DMC-TZ10 User Manual

28 VQT2R24 VQT2R24 29
For details about the setting procedure in the [SETUP] menu (→20)
Using [SETUP] menu (Continued)
Item Settings, notes
[VERSION DISP.]
Check the version of the
camera firmware.
Current version is displayed.
[FORMAT]
Use when [BUILT-IN
MEMORY ERROR]
or [MEMORY CARD
ERROR] appears, or
when formatting the built-
in memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
[YES]/[NO]
•
This requires a sufficiently charged battery (→11), or an
AC adaptor (optional) and DC coupler (optional). When
formatting the built-in memory, remove any cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
• Always format cards with this camera.
• All picture data including protected pictures will be
deleted. (→132)
• Do not turn off power or perform other operations during
formatting.
• Formatting the built-in memory may take several
minutes.
• Consult your nearest Service Centre if format cannot be
successfully completed.
[LANGUAGE]
Change display
language.
Set the language displayed on the screen.
For details about the setting procedure in the [SETUP] menu (→20)
[DEMO MODE]
View demonstration of
functions.
[STABILIZER DEMO.]: (Only during recording)
Extent of jitter is shown on graph (estimate)
Extent of jitter after correction
Extent of jitter
Large ← Small → Large
• During demo screen display, the optical image stabilizer
switches ON and OFF every time [MENU/SET] is
pressed.
• Cannot display during playback mode.
• To stop→ Press [DISPLAY] button.
• Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory slideshow
[OFF]/[ON]
• To close → Press [MENU/SET]
• When a card is not inserted, automatic demo mode
will start if there is no operation for about two minutes
with the power ON when connected to the AC adaptor
(optional) and DC coupler (optional).
• [AUTO DEMO] cannot be displayed on external devices
such as TVs.
Item Settings, notes

Panasonic Lumix DMC-TZ10 Specifications

General

Megapixel	12.1 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.33 \
Supported aspect ratios	3:2, 4:3, 16:9
Maximum image resolution	4000 x 3000 pixels
Filter	Primary Color
Digital zoom	4 x
Optical zoom	12 x
Combined zoom	48 x
Focal length range	4.1 - 49.2 mm
Number of aspheric elements	10
Interface	USB 2.0, AV: NTSC, PAL, mini HDMI
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	103.3 x 32.6 x 59.6 mm
Focal length (35mm film equivalent)	25 - 300 mm
Focus adjustment	Auto
Normal focusing range	0.5 - 2.0 m
Macro focusing range (tele)	2.0 m
Macro focusing range (wide)	0.5 m
Normal focusing range (tele)	2 - ∞ m
Normal focusing range (wide)	0.5 - ∞ m
Light metering	Centre-weighted, Spot
Light exposure modes	aperture priority AE, manual, shutter priority AE
Light exposure control	Program AE
Flash modes	auto, Flash off, Red-eye reduction
Flash range (tele)	1 - 3.6 m
Flash range (wide)	0.6 - 5.3 m
Internal memory	15 MB
Compatible memory cards	sd, sdhc, sdxc
Motion JPEG frame rate	30 fps
Maximum video resolution	1280 x 720 pixels
Field of view	100 %
Display diagonal	3 \
USB version	2.0
Scene modes	Children, Night, Night portrait, Portrait, Sports, Sunset
White balance	auto, Cloudy, Shade
Camera playback	Thumbnails
Self-timer delay	2 s
Playback zoom (max)	16 x
Product color	Blue
Battery capacity	895 mAh
Battery life (CIPA standard)	300 shots
Bundled software	PHOTOfunSTUDIO 5.1 HD QuickTime.Adobe Reader

Weight and Dimensions

Depth	32.6 mm
Width	103.3 mm
Height	59.6 mm
Weight	196 g