EasyManua.ls Logo

Panasonic Lumix DMC-TZ10

Panasonic Lumix DMC-TZ10
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76 VQT2R24 VQT2R24 77
Taking motion pictures [MOTION PICTURE] Mode
Recording mode :
The illustration shows the DMC-TZ8.
Playing back motion pictures (84)
For information on the available recording time (174)
Depending on the type of card used, a card-access display may appear for a while after motion
picture recording. This does not indicate a problem.
Immediately release the shutter button after pressing it all the way.
Easy zoom cannot be used while recording a motion picture.
The following functions are not available.
Extra optical zoom, flash, [FACE RECOG.] and [ROTATE DISP.] for still pictures taken vertically.
Sounds of camera operations, such as zoom movement and beeps may be recorded.
The zoom speed is slower than normal.
In [AF MODE], (1-area-focusing) is fixed.
In [STABILIZER], [MODE 1] is fixed.
To fix the focus setting, set [CONTINUOUS AF] to [OFF]
When there is no space left to store the motion picture, recording automatically ends. Additionally,
recording in progress may be stopped, depending on the card used.
Depending on the motion picture recording environment, static electricity or electromagnetic waves
may cause the screen to go black momentary or noise to be recorded.
For the operating procedures for the DMC-TZ10 (72)
Microphone
This records motion pictures with audio. (Recording with muted sound is not possible.
Sound recording is monaural (DMC-TZ8) or stereo (DMC-TZ9).) (Recording with muted
sound is not possible.) Zoom can also be used during recording.
Set to
Set the mode dial to
Start recording
Press halfway
(Adjust the focus)
Press fully
(start recording)
End recording
Press fully
Remaining recording time (approx.)
Elapsed recording time (approx.)
[REC QUALITY]
Changing the motion picture size. When recording motion picture, use a card rated with
an SD speed class
1
of ‘Class 6’ or higher.
1
SD speed class refers to a specification for sustained write speeds.
Display [REC] menu
Select [REC QUALITY]
Select the desired picture
quality
Close menu
Picture Quality Picture Size No. of Frames
Picture Aspect
Ratio
[HD] 1280 × 720 pixels
30 fps
16:9
[WVGA] 848 × 480 pixels
[VGA] 640 × 480 pixels
4:3
[QVGA]
2
320 × 240 pixels
2
[QVGA] is fixed when recording to built-in memory.
When recording motion pictures, it is recommended to use a sufficiently charged battery or an AC
adaptor (optional) and DC coupler (optional).
When recording motion pictures using an AC adaptor, if you unplug the AC adaptor or a power
outage occurs, power to the camera is cut, and the motion picture in progress is no longer recorded.
If you attempt to play motion pictures recorded with the camera on other devices, playback may not
be possible, or the picture or sound quality may be poor. Additionally, incorrect recording information
may be indicated.
Motion pictures recorded with the camera cannot be played on Panasonic LUMIX digital cameras
sold before July 2008. (However, motion pictures recorded with LUMIX digital cameras sold before
this date can be played on this camera.)
This camera has new sound recording specifications to improve sound quality. Therefore in some
cases motion pictures recorded in [MOTION JPEG] may not be able to play back in Panasonic’s
LUMIX
digital cameras. (Motion pictures recorded with Panasonic’s LUMIX digital camera can be
played back with this digital camera)
Applies to LUMIX cameras sold through December 2008 and some sold in 2009 (FS, LS series)

Table of Contents

Other manuals for Panasonic Lumix DMC-TZ10

Related product manuals