130 VQT2R24 VQT2R24 131
Using [PLAYBACK] menu (Continued)
Playback mode: (Set mode dial to any except )
For the [PLAYBACK] menu setting procedure (→20)
[FAVORITE]
By labeling your favourite pictures with a star ( ), you can enjoy [SLIDE SHOW] or
[FAVORITE PLAY] of these pictures only, or you can delete all pictures except your
favourites (→45).
Set-up: Press [MENU/SET]→ [PLAYBACK] menu → Select [FAVORITE]
Select [ON]
Close menu
Select picture and make setting (repeat)
Displayed when
set (not displayed
when [OFF]).
• Up to 999 pictures can be selected.
(For AVCHD Lite motion pictures,
999 or more pictures can be set.
)
• To release → Press ▼ again.
■
To clear all Select [CANCEL] in step and select [YES].
●
Cannot be set in [FAVORITE PLAY] Playback Mode.
●
It may not be possible to set pictures taken with certain other devices as favourites.
●
Setting/release can also be made with supplied software ‘PHOTOfunSTUDIO’.
[PRINT SET]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
Set-up: Press [MENU/SET]→
[PLAYBACK] menu → Select [PRINT SET]
Select [SINGLE] or [MULTI]
Select picture
●
[SINGLE]
●
[MULTI]
Set number of pictures
(repeat steps and when using [MULTI] (up to 999 pictures))
●
[SINGLE]
●
[MULTI]
No. to print
Date print
set
No. to print
Date print set
• Date print setting/release → Press [DISPLAY] button.
• After confirmation, press
to return to the menu screen.
■
To clear all
Select [CANCEL] in step and select [YES].
●
When using PictBridge-compatible printers, check settings on actual printer as these
may take priority over camera settings.
●
To print from built-in memory at a shop, first copy pictures to card (→135) before making settings.
●
DPOF print settings may not be made to non-DCF (→44) files.
●
Some DPOF information set by other equipment cannot be used. In such cases, delete
all of the DPOF information and then set it again with this camera.
●
Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These
settings will also be cancelled if a [TEXT STAMP] is applied later.
●
Motion pictures recorded in [AVCHD Lite] format cannot be set.
To Next Page
Loading...
