140 VQT2R24 VQT2R24 141
Using with your PC (Continued)
∗
New folders are created in the following cases:
• When pictures are taken to folders containing files numbered 999.
• When using cards already containing the same folder number (including pictures
taken with other cameras, etc.)
• When recording after performing [NO.RESET] (→25)
• File may not be able to be played back on camera after changing file name.
• If mode dial is set to , built-in memory data (including clipboard pictures) are
displayed even when card is inserted. Data in card is not displayed.
• Do not delete or modify folders or data in the AVCHD folder using Windows
Explorer or other tools. The camera may be unable to play back the motion
pictures correctly if any of these files are deleted or modified. For data
management and editing of motion pictures recorded in [AVCHD Lite], use the
‘PHOTOfunSTUDIO’ software on the supplied CD-ROM.
■
When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB MODE] (→26) is set to
[PictBridge (PTP)].
• Only picture output can be performed from the camera. (Picture deletion can also be
performed with Windows Vista and Windows 7.)
• It may not be possible to import if there are 1000 or more pictures on the card.
• Motion pictures recorded in [AVCHD Lite] format cannot be read.
Built-in
memory/
Card
JPG:
Still pictures
MOV:
Motion pictures
You can save pictures to use on your computer by dragging and dropping folders and
files into separate folders on your computer.
■
Folder and file names on computer
DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
:
∗
999_PANA
MISC (DPOF files, Favourite)
PRIVATE1 (clipboard pictures) Built-in
memory
MEMO0001.JPG
PRIVATE
When using
memory card
AVCHD
(Motion pictures in AVCHD Lite)
MODELINF
(VIERA Link information)
●
Windows
Drives are displayed
in ‘My Computer’ or
‘Computer’ folder.
●
Macintosh
Drives are displayed on
the desktop.
(Displayed as ‘LUMIX’,
‘NO_NAME’, or
‘Untitled’.)
■
Playing motion pictures recorded in [AVCHD Lite] on your computer
Use the ‘PHOTOfunSTUDIO’ software on the supplied CD-ROM.
Save the motion picture to your computer, and play it back.
■
Playing motion pictures recorded in [MOTION JPEG] on your computer
Use the ‘QuickTime’ software on the supplied CD-ROM.
• Installed as standard on Macintosh
Save motion pictures to your computer before viewing.
●
Do not use any other USB connection cables except the supplied one.
●
Turn off power before inserting or removing memory cards.
●
When the battery begins to run out during communication, a warning beep sounds.
Cancel communication via your computer immediately (recharge the battery before
reconnecting).
●
Setting the [USB MODE] (→26) to [PC] remove the need to make the setting each time
the camera is connected to the computer.
●
For more details, consult your computer operating manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
