10. Recording Videos
DVQX1961 (ENG)
105
3
Press 34 to select the filtering conditions and then press or .
4
Press [DISP.] to set.
0
You are returned to the [Rec Quality] setting screen.
Clearing the filtering conditions
Select [ANY] in Step 3.
0
The filtering conditions are also cleared when you do the following:
– Changing the [System Frequency]
– Select a recording quality from [Rec Quality (My List)]
[add to list]
Select a recording quality and register it in My List. The recording quality
you register can be set in [Rec Quality (My List)].
In the [Rec Quality] setting screen, press [Q].
0
The following settings are also registered at the same time:
– [System Frequency]
– [Rec. File Format]
– [Image Area of Video]
Setting or deleting in My List
1
Select [Rec Quality (My List)].
0
¨ [ ] ¨ [ ] ¨ [Rec Quality (My List)]
2
Press 34 to select a setting item and then press or .
0
You cannot select setting items that have different system frequencies.
0 To delete from My List, select the item and press [Q].
[Image Area of Video]
Set the image area during video recording. The angle of view differs
depending on the image area. Narrowing the image area allows you to
achieve a telescopic effect without image deterioration.
0 When you change recording quality using a filter, the current filtering
conditions are stored.
DC-S1HGN-DVQX1961_eng.book 105 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
