6. Image Stabiliser
DVQX1961 (ENG)
75
0 Operation modes that can be used will differ depending on the used lenses and on
[Body(B.I.S.) / Lens(O.I.S.)] settings.
0 When using lenses with an O.I.S. switch, the camera’s operation mode cannot be
set to [OFF]. Set the switch on the lens to [OFF].
0 When the following functions are being used, [Operation Mode] switches to [ ]
([Normal]):
– [ ] mode
– Video recording/[6K/4K PHOTO]/[Post-Focus]
[Boost I.S. (Video)]
Increase the effectiveness of the image stabiliser during video recording.
This effect can help provide a stable composition when you want to
perform recording from a fixed perspective.
Settings: [ON]/[OFF]
0
When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen.
0 To change composition while recording, first set this to [OFF] before moving the
camera.
To set this to [OFF] during recording, use the Fn button. (l 153)
0 Longer focal lengths will result in weaker stabilisation.
[Anamorphic (Video)]
You can switch to an image stabiliser that suits anamorphic recording.
0
Make settings to suit the magnification of the anamorphic lens you are using.
0 While [Anamorphic (Video)] is functioning, the set magnification appears on the
image stabiliser icons on the recording screen, as shown by [ ] and [ ].
[Lens Information]
Register the information for lenses that cannot communicate with the camera.
Match the in-body image stabiliser with the information of the lens you register.
The settings on this camera enable you to switch settings to suit full-frame
or Super 35 mm/APS-C lenses. (l 16)
Settings: [ ]([2.0k])/[ ]([1.8k])/[ ]([1.5k])/[ ]([1.33k])/
[]([1.30k])/[OFF]
0 When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritised.
DC-S1HGN-DVQX1961_eng.book 75 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
