Panasonic MCDDT3520 - [Preparation]

[Preparation]
page
System Configuration and Wiring .........................28
Overall Wiring (Connecting Example of C-frame, 3-phase)........ 28
Overall Wiring (Connecting Example of E-frame) ....................... 30
Driver and List of Applicable Peripheral Equipments .................. 32
Wiring of the Main Circuit (A to D-frame) .................................... 34
Wiring of the Main Circuit (E and F-frame).................................. 35
Wiring to the Connector, CN X6 (Connection to Encoder).......... 38
Wiring to the Connector, CN X3 and 4
Wiring to the Connector, CN X7 (Connection to External Scale) ..... 40
Wiring to the Connector, CN X5 (Connection to Host Controller)..... 41
Wiring for Connector CN X5........................................................ 42
Interface Circuit ........................................................................... 43
List of Signal for Connector CN X5 ............................................. 44
Setup with the Front Panel.....................................48
Composition of Touch Panel and Display.................................... 48
Initial Status of the Front Panel Display (7-Segment LED) ......... 48
Output Signals (Analog) and Their Functions ............................. 49
Built-in Holding Brake ............................................50
Dynamic Brake ........................................................52
27