Procedure of install
1) Turn on the power of the computer to log on the supporting OS. (Exit the existing logged on software.)
2) Insert the setup disc of the "PANATERM
®
" to CD-ROM drive.
3) The window opens automatically so click the name of the file required.
* If the window fails to appear automatically, start up Explorer, and run the targeted setup file.
4) Operate according to the guidance of the setup program.
5) Click on the installation verification window to start the setup.
6) Exit all applications and log on Windows
®
again.
"PANATERM
®
" will be added on program menu when you log on again.
Log on of the "PANATERM
®
" .
<Cautions/Notes>
1. Once the "PANATERM
®
" is installed in the hard disc, you do not need to install every time you log on.
2. Connect the driver to a power supply, the motor and encoder before you log on.
Refer to the instruction manual of supporting OS for start.
Procedure of log on
1) Turn on the power of the computer and log on the supporting OS.
2) Turn on the power of the driver.
3) Click the start bottom of the supporting OS.
(Refer to the instruction manual of supporting OS for start.)
4) Select the "PANATERM
®
" with program and click.
5) The screen turns to "PANATERM
®
" after showing opening splash for approx. 2sec.
For more detailed information for operation and functions of the "PANATERM
®
", refer to the instruction
manual of the Setup Support Software, "PANATERM
®
".
* Windows
®
, Windows
®
98, Windows
®
2000, Windows
®
Me and Windows
®
XP are trade marks of Microsoft
Corp.
OK
To Next Page
Loading...
