12.3. Removal of A-P.C.Board
(1) Remove the G-P.C.Board according to the section 12.6.
"Removal of G-P.C.Board".
(2) Unscrew the 4 screws and remove the FH-Module.
Note:
·
The FH-Module is connected onto the WF-Module (for
PT-DW100*, A-P.C.Board) with the connector. Work
carefully when removing it.
(3) Unscrew the 4 spacers counterclockwise and remove the WF-
Module.
Note:
·
The WF-Module is connected onto the A-P.C.Board with
the connector. Work carefully when removing it.
·
For PT-DW100*, skip work in this step because the WF-
Module is not installed.
(4) Unscrew the 6 screws and remove the A-P.C.Board.
30
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
