(2) Loosen the 3 screws until they idle and remove the lamp unit 2.
(3) Unscrew the 2 screws and remove the L2-P.C.Board.
12.10. Removal of NN-Module
(1) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2) Unscrew the 3 screws and remove the NN-Module.
35
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
