(6) Unscrew the 19 screws and remove the connection terminals
metal fittings.
(7) Unscrew the 5 screws and remove the G-P.C.Board.
Note:
·
The G-P.C.Board is connected onto the A-P.C.Board
with the connector. Work carefully when removing it.
12.7. Removal of J-P.C.Board
(1) Remove the A-P.C.Board according to the section 12.3.
"Removal of A-P.C.Board".
(2) Unscrew the 2 screws and remove the J-metal fittings.
33
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
