12.26. Removal of Synthesis Block
(1) Remove the synthesis block (with lamp case) according to the
section 12.25. "Removal of Analysis Block".
(2) Unscrew each of 3 screws and remove the 4 lamp cases.
(3) Unscrew the 2 screws and remove the optical holding metal
fixture.
(4) Unscrew each of 2 screws and remove the 2 bimetals.
(5) Unscrew the 2 screws and remove the shading board metal
fittings.
(6) Unscrew each of 2 screws and remove the 4 lamp duct blocks.
(7) Unscrew the 2 screws and remove the color prism fan.
12.27. Removal of DMD Block and Liquid Cooling Unit
Note:
·
Before attempting the removing, shift the lens to the foremost position.
53
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
