(8) Unscrew the 5 screws and separate the ballast holding metal
fittings (ballast unit) and the PFC holding metal fittings (power
unit).
(9) Unscrew each of 4 screws and remove the ballasts 3 and 4 (B/Q-
Module).
12.19. Removal of PFC-Modele
·
The procedure is described as an example of Ballast Block L.
44
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
