12.4. Removal of CL-P.C.Board
(1) Loosen the 1 screw until it idles and take the filter cleaning unit
out.
(2) Unscrew the 5 screws and remove the front cover.
(3) Unscrew the 1 screw and remove the CL-P.C.Board.
12.5. Removal of FH-Module
(1) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2) Unscrew the 4 screws and remove the FH-Module.
Note:
·
The FH-Module is connected onto the WF-Module (for
PT-DW100*, A-P.C.Board) with the connector. Work
carefully when removing it.
31
PT-DZ12000U / PT-DZ12000E / PT-D12000U / PT-D12000E / PT-DW100U / PT-DW100E
To Next Page
Loading...
