Panasonic PT-RZ670

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 145
[Mail error log] page
Click [Status] → [Mail error log].
Display E-mail error information if periodic E-mail sending has failed.
Note
f [Access error log] and [Mail error log] display the recent few thousand accesses/requests. All information may not be displayed when many
accesses/requests are made at one time.
f When [Access error log] and [Mail error log] exceed certain amount, information is erased from the oldest.
f Check [Access error log] and [Mail error log] periodically.
[Basic control] page
Click [Projector control] → [Basic control].
6
1
2
3
4
5
1 [POWER]
Turns on/off the power.
2 [SHUTTER]
Switches whether to use the shutter function (enabled (shutter:
closed)/disabled (shutter: open)).
3 [OSD]
Switches on (display)/off (hide) the on-screen display function.
4 [SYSTEM]
Switches the system method.
5 On-screen display of the projector
Displays the same items as shown on the on-screen display
of the projector. You can check or change the settings of the
menus. It is displayed even if the on-screen display function is
set to off (hide).
6 [INPUT SELECT]
Switches the input signal.
(SDI input is supported only for PT-RZ670.)