Chapter 4 Settings — [NETWORK] menu
146 - ENGLISH
[Detail control] page
Click [Projector control] → [Detail control].
5
4
3
2
1
9
8
7
6
1 Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is
updated.
2 [SUB MEMORY]
Switches the sub memory.
3 [SYSTEM DAYLIGHT VIEW]
Switches to system daylight view settings.
4 [FREEZE]
Temporarily pauses the image.
5 [P IN P]
Switches the P IN P setting.
6 [WAVEFORM MONITOR]
Displays the waveform of the input signal.
7 [LENS]
Adjusts the projection lens.
8 [TEST PATTERN]
Displays the test pattern.
9 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
To Next Page
Loading...
