Panasonic SC-HM910 - Page 20

SC-HM910/SC-HM810
20
Note:
Hold the loading stopper ass’y manually because it is flipped by
spring.
Step 6 Remove the cushion spring.
Step 5 Remove the loading stopper ass’y in the direction of
arrow.
Step 10 Remove the lower spindle spring with tweezers.
Step 8 Release the 2 claws, and then remove the relay gear
A.
Step 9 Release the 2 claws, and then remove the spindle shaft.
Step 11 Force the lower hook with thin tip of minus screwdriver.