EN52
Bread pan, blade Lid
Wash with water after the
residual dough is cleared.
a well-wrung cloth.
Cleaning
In order to avoid
damaging the
fluorine coating of
the bread pan …
ɑPlease clean and dry as quickly as possible!
Do not put an unclean or wet
bread pan back into the machine.
ɑClean with a soft sponge!
Do not use cleanser or metal
brush to clean the bread pan.
And do not use the nylon face of
a sponge, sponges wrapped in
nylon net or dish dryer as well.
(
)
( )
ʗAdd a small amount
of hot water into the
bread pan and let it
sit for a while.
ɑIf blade is hard to
remove, rotate the
blade slightly to
remove it.
ʘClean the bread
pan and the blade
with water.
ɑDo not leave any
residual dough
around the shaft or
it may damage the
fluorine coating.
ʙUse a bamboo stick
to remove the dough
stuck on the blade
and the shaft.
ɑAny residual dough on the shaft may
cause the blade to be easily detached or
left in the bread.
ɑUse a well-wrung cloth to clean
away the instant dry yeast on
the flap valve and make sure
that the vent of yeast dispenser
is closed.
ɑUse kitchen detergents (neutral) to clean
the shaft if it is very dirty.
Wipe with
To Next Page
Loading...
