6.16. Removal of SU-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (L), (R) )
2. Remove 6 screws and then remove the Reinforcement
Angle (A).
3. Disconnect the Fan relay couplers.
4. Remove 4 screws and then remove the Fan Block (A), (B).
5. Remove the flexible cables from the connectors (SU1, SU2,
SU3, SU4).
6. Disconnect the connectors (SU45, SU55).
7. Remove 9 screws.
8. Slide the SU-Board to the upper direction to remove the
SU-Board from the connectors (SU41, SU42).
Take out so as not to damage SU-Board.
20
TH-103PF9UK / TH-103PF9EK
To Next Page
Loading...
