Panasonic TH-103PF9EK - Timer and Time Settings; Present Time Setup; Timer Setup Introduction

6. Remove 6 screws and then remove C2-Board.
6.28. Removal of C3-Board
1. Remove 5 screws and then remove the Rear Cover Angle
(C).
2. Remove 6 screws and then remove the Reinforcement
Angle (C).
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CA6, CA7,
CA8, C31, C32).
5. Disconnect a connector (C34).
6. Remove 5 screws and then remove C3-Board.
27
TH-103PF9UK / TH-103PF9EK