Panasonic TH-103PF9EK - Removal of DR1-Board (A)

6. Remove 4 screws and then remove CZ-Board.
6.38. Removal of DR1-Board (A)
1. Remove 4 screws and then remove the Fan Block (B).
2. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
3. Remove 5 screws and then remove the DR1-Board (A).
6.39. Removal of DR1-Board (B)
Attaching short jumper to connector (DR6).
Attach Short Jumper to the connector (DR6) when replacing
DR1-Board.
1. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6) on
DR1-Board you removed and attach it to the connector
(DR6).
33