Panasonic TH-103PF9EK - Removal of SS3-Board

6.23. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L))
2. Disconnect the relay connector of the Speaker Terminal (L).
3. Remove 6 screws and then remove the Reinforcement
Plate (F).
4. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
5. Disconnect the connectors (SS36, SS37, SS38, SS39).
6. Remove 6 screws and then remove SS3-Board.
6.24. Removal of SS-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L))
2. Remove 4 screws and then remove the Fan Block (F), (G).
24
TH-103PF9UK / TH-103PF9EK