(D).
2. Remove 6 screws and then remove the Reinforcement
Angle (D).
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CB9,
CB10, CB11, C90, C91, C93).
5. Disconnect the connectors (C92, C94).
6. Remove 5 screws and then remove C9-Board.
6.35. Removal of CX-Board
1. Remove the Rear Cover Angle (D).
(Refer to Removal of C9-Board)
2. Remove the Reinforcement Angle (D).
(Refer to Removal of C9-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CB6, CB7,
CB8, CX1, CX2).
5. Disconnect a connector (CX4).
31
TH-103PF9UK / TH-103PF9EK
To Next Page
Loading...
