Panasonic TH-103PF9EK - Removal of DR2-Board (A)

6.40. Removal of DR2-Board (A)
1. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
2. Remove 5 screws and then remove DR2-Board (A).
6.41. Removal of DR2-Board (B)
Attaching short jumper to connector (DR16).
Attach Short Jumper to the connector (DR16) when replacing
DR2-Board.
1. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
2. Remove 5 screws and then remove DR2-Board (B).
3. Remove Short Jumper attaching to the connector (DR16)
on DR2-Board you removed and attach it to the connector
(DR16).
6.42. Removal of CD-Board
6.42.1. Removal of CD-Board (A)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (A).
6.42.2. Removal of CD-Board (B)
1. Remove the flexible cables from the connectors (CD1,
CD2).
34