6.26. Removal of C1-Board
1. Remove the Side Angle (R).
(Refer to Removal of Side Angle (R))
2. Remove the Reinforcement Angle (A).
(Refer to Removal of SU-Board)
3. Remove 4 screws of the flexible cable.
4. Disconnect the coupler (C14).
5. Remove the flexible cables from the connectors (CA1, CA2,
C11).
6. Remove 4 screws and then remove C1-Board.
6.27. Removal of C2-Board
1. Remove 5 screws and then remove the Rear Cover Angle
(A).
2. Remove the Reinforcement Angle (A).
(Refer to Removal of C1-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CA3, CA4,
CA5, C20, C21, C23).
5. Disconnect the connectors (C22, C24).
26
TH-103PF9UK / TH-103PF9EK
To Next Page
Loading...
