13
5. Insert the tray.
2.4.2. In manuellen Karton legen
1. Adjust the guide to match the size of the loaded paper.
2. Load a sheet of paper with the printable side facing up.
• For single-sided printing, load the paper with the printable side facing up and the top
edge going into the printer first.
• For better printing effect, it is recommended to use new, undamaged paper.
3. Feed the paper until its front edge is pulled in.
• To avoid paper jams, do not force paper into the manual tray.
To Next Page
Loading...
Need help?
General