68
7.2.2.3. RGB correction
Adjust the contrast, saturability and brightness of the color output.You can change it through the
following steps as necessary.
1. Open the file to be printed, click the “File” menu in the upper left corner, and select “Print” to
enable the print driver.
2. Select printer of the corresponding model.
3. Click “Printer Properties/Preferences” to configure printing.
4. Enter the “Quality” option interface. In the “RGB Correction” option, select “Manual” to adjust
“Brightness”, “Contrast” and “Saturability”.
• If you choose “Use Printer Settings”, you cannot adjust the contrast, saturability, and
brightness, and the settings specified in the printer are applied.
To Next Page
Loading...
