Parkside PTBMOD 710 C3 - Translation of the Original EC Declaration of Conformity

266
GB
MT
Translation of the original EC
declaration of conformity
We hereby conrm that the
Bench pillar drill
Design Series PTBMOD 710 C3
Serial Number
000001 - 035000
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2014/30/EU • 2011/65/EU* & (EU) 2015/863
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 62841-1:2015 • EN 62841-3-13:2017
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021 • EN 61000-3-3:2013/A2:2021
EN 61010-1:2010/A1:2019 • EN 60825-1:2014/A11:2021 • EN 62471:2008
EN IEC 63000:2018
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
( Documentation Representative )
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
GERMANY
01.05.2023
* The object of the declaration described above satises the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.