Book PC
This chapter provides information on how to setup the peripheral device.
Setup the Television as System Console
Note: Selecting TV to be the display equipment is an optional choice.
How to install your system with television console?
Selecting your television to NTSC or PAL mode.
Step 1: Make sure your system’s power is off.
Step 2: Connecting video cable between the Television and Book PC.
Note: 1. The video cable is an optional accessory.
2. S-video cable is recommended to use between the Television and Book PC to
get better video quality.
Step 3: Power-on your system.
Step 4: Press “DEL” key to enter BIOS SETUP mode, while the “Press DEL to enter
SETUP” message is displayed on the screen.
Step 5: Move the cursor to the item, “Integrated Peripherals”, then press “Enter” key to
select the “Integrated Peripherals” setup.
CMOS Setup Utility – Copyright ( C ) 1984-1999 Award Software
Standard CMOS Features CPU Frequency Control
Advanced BIOS Features Load Fail-Safe Defaults
Advanced Chipset Features Load Optimized Defaults
Integrated Peripherals Set Supervisor Password
Power Management Setup Set User Password
PnP/PCI Configurations Save & Exit Setup
PC Health Status Exit Without Saving
To Next Page
Loading...