How to install your system with SCART TV console?
Step 6: In “TV System Selection”, select the television mode to NTSC or PAL depended
on your TV.
CMOS Setup Utility – Copyright ( C ) 1984-1999 Award Software
Integrated Peripherals
OnBoard IDE Channel Enabled Item Help
IDE Master PIO Auto
IDE Slave PIO Auto Menu Level
IDE Master UDMA Auto
IDE Slave UDMA Auto
USB Controller Enabled
USB Keyboard Support Disabled
Onboard Audio/Modem Chip Enabled
Onboard Lan Chip Disabled
IDE HDD Block Mode Enabled
POWER ON Function Hot Key
KB Power ON Password Enter
Hot Key Power ON Ctrl-F1
TV System Selection NTSC
Onboard FDC Controller Enabled
Onboard IR Port Select Disabled
IR Mode Select IrDA
IR Duplex Mode Half
Onboard Parallel Port 3BC/IRQ7
Note: 1. If you do not know which system your TV provides, please check with your TV
supplier.
2. If you use the SCART TV, select the television mode to PAL.
Step 7: Press “ECS” key to return the BIOS SETUP Main menu.
Step 8: Press “F10” key to save and exit the setup program.
How to adjust the best video quality of your TV Output?
This section explains how to adjust the computer’s display settings under Microsoft
Windows to optimize them for use with a television as the display device.
Follow the procedure outlined here to make the necessary settings.
I. Set the display font to the largest size.
Please follow this procedure to adjust the display font size.
To Next Page
Loading...