Relion 1900e/2900e Manual
145 Revision 1.3
DIMM_T1 failed test/initialization
DIMM_T2 failed test/initialization
DIMM_T3 failed test/initialization
DIMM_L3 encountered a Serial Presence Detection (SPD) failure
DIMM_M1 encountered a Serial Presence Detection (SPD) failure
DIMM_M2 encountered a Serial Presence Detection (SPD) failure
DIMM_M3 encountered a Serial Presence Detection (SPD) failure
DIMM_N1 encountered a Serial Presence Detection (SPD) failure
DIMM_N2 encountered a Serial Presence Detection (SPD) failure
DIMM_N3 encountered a Serial Presence Detection (SPD) failure
DIMM_P1 encountered a Serial Presence Detection (SPD) failure
DIMM_P2 encountered a Serial Presence Detection (SPD) failure
DIMM_P3 encountered a Serial Presence Detection (SPD) failure
DIMM_R1 encountered a Serial Presence Detection (SPD) failure
DIMM_R2 encountered a Serial Presence Detection (SPD) failure
DIMM_R3 encountered a Serial Presence Detection (SPD) failure
DIMM_T1 encountered a Serial Presence Detection (SPD) failure
DIMM_T2 encountered a Serial Presence Detection (SPD) failure
DIMM_T3 encountered a Serial Presence Detection (SPD) failure
POST Reclaim of non-critical NVRAM variables
BIOS Settings are corrupted
NVRAM variable space was corrupted and has been reinitialized
8607
Recovery boot has been initiated.
Note: The Primary BIOS image may be corrupted or the system may hang during POST. A
BIOS update is required.
Serial port component was not detected
Serial port component encountered a resource conflict error
TPM device missing or not responding.