Penlon A200SP - Component Specifications; Non-return Valves, Heater, and Classification

A200SP Absorber 14 User Manual
4.6 Non-return Valves
Pressure drop across the nspratory and expratory non-
return valves at an ar flow of 60 L/mn 01 kPa (1 cmHO)
NOTE
Flow characterstcs are dentcal for valves n a dry or wet
condton
A ‘wet’ valve s defned as a valve n a flow of humdfed gas,
such that mosture s vsble on the surface of the valve
4.7 Mode of Operation
Mode of Operaton ontnuous
4.8 Heater (option)
Voltage 100 - 240 VA
urrent
16 A at 100 VA
09 A at 240 VA
Frequency 50/60 Hz
Fuse T2AH 250 V
4.9 Device Classification and Labelling
The Absorber and ts consttuent parts are classfed as
follows
Type B Appled Part
Degree of protecton aganst electrc shock
Ths symbol denotes
Type B equpment
lass 1 lassfcaton
Type of protecton aganst electrc shock lass 1
IPX0 Ingress protecton
lassfcaton accordng to the degree of protecton aganst
ngress of water IPX0 (not protected)
Sterlzaton
A lst of absorber components that may be sterlzed s gven n
secton 8
Oxygen compatblty
The A200SP absorber s not sutable for use n an oxygen rch
envronment
lassfcaton Labellng
Refer to Appendx 4
002 004 006 008 010
60
50
40
30
20
10
Flow
(L/mn)
Pressure
(kPa)
Specification