Pentair FLECK 5600 SXT - Description; Technical Specifications

Installer manual Fleck 5600 SXT - Description
Ref. MKT-IM-013 / E - 23.09.2020 15 / 104
3 Description
3.1 Technical specifications
Design specifications/ratings
Valve body Fiber-reinforced polymer
Rubber components EP or EPDM
Valve material certification DM174, ACS, CE
Weight (valve with controller) 2kg (max)
Recommended operating pressure 1.4 - 8.6bar
Maximum inlet pressure 8.6bar
Hydrostatic test pressure 20bar
Water temperature std 1 - 43°C
Ambient temperature 5 -40°C
Flow rates (3.5bar inlet - valve only)
Continuous service flow (Δp=1bar) 4.5m
3
/h
Peak service flow (Δp=1.8bar) 5.9m
3
/h
Cv* 5.2gpm
Kv* 4.5m
3
/h
Maximum backwash flow
(Δp=1.8bar)
1.6m
3
/h
*Cv: Flow rate in gpm across the valve at a pressure drop of 1 psi at 60°F.
*Kv: Flow rate in m
3
/h across the valve at a pressure drop of 1 bar at 16°C.
Valve connections
Tank top mounted adapter 2½”- 8 NPSM
Inlet/Outlet ¾" or 1"
Riser tube 26.7mm O.D., 1.05"tube
Drain line ½"O.D.
Brine line (1650) ⅜"
Electrical
Power supply 230 AC, 50/60Hz, 15VA
Transformer output voltage 24VAC, 10VA max.
Motor input voltage. 24VAC
Controller input voltage 24VAC
Controller max. power consumption 5W
Protection rating IP22
Transient overvoltages within the limits of category II