Pentair FLECK 5600 SXT - Day of Override (DO); Regeneration Time (RT); Feed Water Hardness (H); Reserve Capacity (RC) or (SF)

Installer manual Fleck 5600 SXT - Programming
Ref. MKT-IM-013 / E - 23.09.2020 55 / 104
6.4.2 Day of override (DO)
1. Press and simultaneously for 5seconds to enter the menus
sequence.
2. Select the number of days of override with and .
3. Press to validate the selection and advance to the next parameter.
6.4.3 Regeneration time (RT)
Determine the time of regeneration.
1. Adjust the regeneration time with and .
2. Press to validate the selection and advance to the next parameter.
6.4.4 Feed water hardness (H)
1. Adjust the water hardness with and .
2. Press to validate the selection and advance to the next parameter.
6.4.5 Reserve capacity (RC) or (SF)
Determine the reserve capacity in litre or in percentage.
1. Adjust the reserve capacity with and .
2. Press to validate the selection and advance to the next parameter.
6.4.6 Current day of the week (CD)
Determine the day of regeneration.
Info
Appears only if the softener is set to "weekly time clock".
1forMonday, 2forTuesday, 3forWednesday, 4forThursday, 5forFriday, 6forSaturday
and 7forSunday.
1. Adjust the day of the week with and .
2. Press to validate the selection and exit the basic programming mode.
6.5 Master programming mode
Info
As soon as programming mode is entered, all parameters can be displayed or set to
suit the needs.
Depending on the current programming, some functions will not be displayed or will not
be selectable.