Pentair FLECK 5600 SXT - Brine Cam Replacement

Installer manual Fleck 5600 SXT - Maintenance
Ref. MKT-IM-013 / E - 23.09.2020 83 / 104
9.4.6 Brine cam replacement
1. Remove the power head, see Power head disassembly/replacement.
2. Using a flat screwdriver, unscrew (1).
3. Remove the washer (2) and the brine cam (3).
4. Change the brine cam (3).
5. Reverse above procedure steps to rebuild.
1
2
3