Pentair FLECK 5600 SXT - Page 53

Installer manual Fleck 5600 SXT - Programming
Ref. MKT-IM-013 / E - 23.09.2020 53 / 104
3. Parameter
display
Master programming and diagnostic modes:
• C: Unit capacity;
• CD: Current day;
• CT: Regeneration control type;
• DF: Display format;
• Dn, n=1 to 7: Day of week;
• DO: Days override;
• FM: Flow meter;
• FR: Current flow rate;
• H: Feedwater hardness;
• HR: Hours in service;
• K: Meter pulse;
• NT: Number of tanks;
• PF: Peak flow rate;
• RC: Reserve capacity;
• RF: Regeneration flow;
• RS: Reserve selection;
• RT: Regeneration time;
• SF: Safety factor;
• SV: Software version;
• TD: Time of day;
• TS: Tank in service;
• V: Filter capacity;
• VU: Volume used.
Regeneration cycles:
• B1: First backwash (for dF2b regeneration flow);
• B2: Second backwash (for dF2b regeneration flow);
• BD: Brine draw;
• BF: Brine fill;
• BW: Backwash;
• RR: Rapid rinse.
4. Data display .
5. PM indicator • Appears if controller set in US unit.
6. Flow indicator • Flashes when outlet flow is detected.
7. x1000 indicator • Appears when the displayed number is bigger than 9999.