Pentair Logix 762 - Page 50

Installer Manual 255/LOGIX 742-762-764 - Programming
50 / 92 Ref. MKT-IM-021 / A - 20.02.2019
6.3.2.3 Time setting
Set the current time.
6.3.2.4 Day of week
Set the current day of the week.
6.3.2.5 Regeneration time
Set the time when regeneration will take place.
6.3.2.6 Days override
Set the number of days for calendar override.
A Press .
→ Time flashes.
B Adjust displayed time with and .
C Press to validate the selection and advance to the next
parameter.
A Press .
→ Arrow flashes.
B Select displayed day with and .
C Press to validate the selection and advance to the next
parameter.
A Press .
→ Regeneration time flashes.
B Adjust displayed time with and .
C Default setting: 2:00am.
D Press to validate the selection and advance to the next
parameter.
A Press .
→ Number of days flashes.
B Adjust displayed number with and .
→ Default setting: 0 day (disabled).
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter.