Pentax OPTIO SV - Adding a Voice Memo

110
5
Recording and Playback
Adding a Voice Memo
You can add a voice memo to a captured image.
1 Enter the Playback mode.
2 Press the four-way controller (45)
to select the image to attach the
voice memo and press the Fn
button.
3 Press the four-way controller (4).
The captured image and the Voice Memo
screen appears on the LCD monitor while
the image is displayed.
4 Press the OK button.
Recording starts. You can record for up to
30 seconds.
5 Press the OK button.
Recording stops.
• U appears on the screen when a voice memo is added.
• A voice memo cannot be added to an image which already has a
voice memo. Delete the old voice memo and record a new one.
(1p.119)
A voice memo cannot be added to the protected (Z) images.
Four-way controller
OK button
Fn button
Q Playback button
100-0010
100-0010
3:00 PM
3:00 PM
100-0010
3:00 PM
7/ 7/2004
7/ 7/2004
7/ 7/2004
F4.7
F4.7
F4.7
1/200
1/200
1/200
Fn
MENU
100-0001
100-0001
100-0001
OK
00
00
sec
sec
00 sec
Start
Start
Start
Cancel
Cancel
Cancel