Pentax OPTIO SV - Taking Panorama Pictures (Panorama Assist Mode)

66
Taking Pictures
4
You can take a number of images and join them together to form a
panorama picture. The panorama softwares supplied with the camera
(ACDSee for PENTAX and ACD photostitcher) and a computer are
necessary for joining the images. The Panorama Assist mode enables
you to overlap the edges of the images so that they are easier to join
together later into a panorama picture.
1 Set the mode dial to PICT and press the four-way
controller (
23).
The Picture Mode screen appears.
2 Use the four-way controller
(
2345) to select F (Panorama
Assist mode).
3 Press the OK button.
4 Use the four-way controller to
choose the direction in which the
images will be joined.
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The example shows the images when
5 is selected.
Taking Panorama Pictures
(Panorama Assist Mode)
Mode dial
Four-way controller
OK button
Shutter release button
Panorama Assist
Panorama Assist
OK
OK
OK
Panorama Assist OK
Set shift direction
Set shift direction
Set shift direction