87
Taking Pictures
4
In the Autofocus mode, you can change the focusing point by moving the
focus frame.
1 In the u (Focusing Area) mode, press the four-way
controller (
2345).
Moves the focus frame [ ] (Focusing area).
2 Press the OK button.
The focus frame is fixed in its new position.
To return the focus frame to its original location, press the qs/i
button again.
Changing the Focusing Point
Troubleshooting “Subject is not in focus” 1p.165
The display mode cannot be changed in the Focusing Area mode.
To Next Page
Loading...
